On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT ABSORBER CONTROL ACTUATOR
| (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: for LH Side
If the result is not as specified, replace the rear shock absorber assembly. |
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Can Communication System(for Hv Model): Check Bus 5 Line for Short to +B
DESCRIPTION There may be a short circuit between one of the CAN bus lines and +B when there is no resistance between terminal 15 (CA5H) of the central gateway ECU (network gateway ECU) and terminal 16 (BAT) of the DLC3, or terminal 16 (CA5L) of the central gateway ECU (network gateway ECU) and termi ...