Toyota Avalon (XX50): Absorber Control Actuator(for Front Side)

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Suspension / Suspension Control / Absorber Control Actuator(for Front Side)

On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT ABSORBER CONTROL ACTUATOR

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

for LH Side

Tester Connection

Condition

Specified Condition

1 (FAL-) - 2 (FAL+)

15 to 25°C

3.3 to 3.7 Ω

for RH Side

Tester Connection

Condition

Specified Condition

1 (FAR-) - 2 (FAR+)

15 to 25°C

3.3 to 3.7 Ω

If the result is not as specified, replace the front shock absorber assembly.

*A

for LH Side

*B

for RH Side

*a

Component without harness connected

(Absorber Control Actuator)

Rear Upper Arm

Absorber Control Actuator(for Rear Side)

See More:

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Can Communication System(for Gasoline Model): Active Noise Control ECU Communication Stop Mode. Air Conditioning Amplifier Communication Stop Mode. ECU Malfunction (B1003)
Active Noise Control ECU Communication Stop Mode DESCRIPTION Detection Item Symptom Trouble Area Active Noise Control ECU Communication Stop Mode Any of the following conditions are met: Communication stop for "Active Noise Control" is indicated on the "Communication Bus Check" screen of the Techstr ...

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

© 2026 Copyright suspension.tavalon.net
0.1408