Toyota Avalon (XX50): Absorber Control Switch

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Suspension / Suspension Control / Absorber Control Switch

Components

COMPONENTS

ILLUSTRATION

ABSORBER CONTROL SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY)

Inspection

INSPECTION

PROCEDURE

1. INSPECT ABSORBER CONTROL SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
13 (B) - 16 (GND1)	NORMAL/CUSTOM mode switch being pushed and held	Below 1 Ω
13 (B) - 16 (GND1)	NORMAL/CUSTOM mode switch not pushed	10 kΩ or higher
12 (P) - 16 (GND1)	SPORT S/S+ mode switch being pushed and held	Below 1 Ω
12 (P) - 16 (GND1)	SPORT S/S+ mode switch not pushed	10 kΩ or higher
11 (ECU) - 16 (GND1)	ECO mode switch being pushed and held	Below 1 Ω
11 (ECU) - 16 (GND1)	ECO mode switch not pushed	10 kΩ or higher

(1) If the result is not as specified, replace the absorber control switch (electric parking brake switch assembly).

*a	Component without harness connected (Absorber Control Switch (Electric Parking Brake Switch Assembly))

Installation

INSTALLATION

PROCEDURE

1. INSTALL ABSORBER CONTROL SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY)

Click here

Absorber Control Actuator(for Rear Side)

Adaptive Variable Suspension System

See More:

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Tire / Wheel: Tire And Wheel System
How To Proceed With Troubleshooting PROCEDURE 1. CHECK TIRE AND WHEEL SYSTEM DIAGNOSIS OF IRREGULAR TIRE WEAR GO TO STEP 11 DIAGNOSIS OF TIRE VIBRATION 2. TIGHTEN WHEEL NUTS Click here NEXT 3. INSPECT TIRES Click here NG GO TO STEP 10 OK 4. INSPECT AND/OR ADJUST WHEEL BALANCE Click here NEXT 5. INSP ...